1. See Detail

Cryo Jet DMX Switchable T35

SKU
cg15
Out of stock
Only 0 left
Quick Overview
CryoFX CO2 Jet DMX Switchable, one of CryoFX best sellers, remains industry standard when referring to CO2 Jets. Its simple design and ease of use allows for both DMX and Standard Power switch on/off capabilities. While in DMX mode, can be controlled by a DMX 512 controller utilizing 1 channel of DMX for on/off control. While in "Standard" mode, this cryo jet can be controlled by any on/off switch to the power supply feeding power to the unit. (Example: power strip on/off button being used to turn the cryo jet on/off when jet is plugged into the power strip and is in Standard mode). CryoFX CO2 Jet DMX Switchable is lightweight and has the capabilities to be linked to other units for simultaneous control of multiple jets. This Cryo Jet comes in 110vAC and 220vAC with ability to be installed on truss or used on floor. Built to withstand rugged conditions, the CO2 DMX Switchable Jet reaches heights of 25-35 feet (8-10 meters) and weighs only 14.4 Lbs (6.5Kg). With easy assembly, included manual and 15 feet (5 meters) of hose, and quick setup time, you will be ready to use this CO2 Jet in minutes, pending you already have CO2. Compatible with both high and low pressure systems. 1 year manufacture warranty. CO2 is not included.
$1,099.00
CryoFX CO2 Jet DMX Switchable, one of CryoFX best sellers, remains industry standard when referring to CO2 Jets. Its simple design and ease of use allows for both DMX and Standard Power switch on/off capabilities. While in DMX mode, can be controlled by a DMX 512 controller utilizing 1 channel of DMX for on/off control. While in "Standard" mode, this cryo jet can be controlled by any on/off switch to the power supply feeding power to the unit. (Example: power strip on/off button being used to turn the cryo jet on/off when jet is plugged into the power strip and is in Standard mode). CryoFX CO2 Jet DMX Switchable is lightweight and has the capabilities to be linked to other units for simultaneous control of multiple jets. This Cryo Jet comes in 110vAC and 220vAC with ability to be installed on truss or used on floor. Built to withstand rugged conditions, the CO2 DMX Switchable Jet reaches heights of 25-35 feet (8-10 meters) and weighs only 14.4 Lbs (6.5Kg). With easy assembly, included manual and 15 feet (5 meters) of hose, and quick setup time, you will be ready to use this CO2 Jet in minutes, pending you already have CO2. Compatible with both high and low pressure systems. 1 year manufacture warranty. CO2 is not included. This package comes with the following: • CO2 Jet units with attached quick connect fittings and attached base plate for mounting • 15' foot (5 meter) long high pressure CO2 Cryo Hose with attached quick connect fittings. • Brass fitting (to connect hose to CO2 Tank). • 35lb Co2 Aluminum Siphon Tank. • 3 Pin DMX Cable (15 foot long). • Power Cable • Manual, Safety Guidelines, and FAQ (Frequently Asked Questions) • 1 YEAR WARRANTY AGAINST OPERATIONAL/MECHANICAL DEFECTS NOTE: The CO2 Tank ships empty. CO2 liquid is not included. The hose and CO2 Jet listed here have quick connect fittings already installed so you can easily disconnect the hose from the CO2 Jet when not in use. Electricity is required for this package. Simply connect the hose to the CO2 Jet and the other end of the hose to your CO2 tank. Then connect your DMX cable to the CO2 Jet "In" jack and the other end to any DMX 512 controller, and your ready to go! On this unit, the DMX Switch allows you to turn DMX "on" (to use with DMX 512 controllers) or "off" to use as a standard Cryo Jet (controlled using a power switch where as the on/off ability comes from power being applied to the unit). The ideal DMX controller to use with this unit is one with a "Flash" button (button that only send signal when held down), similar to ones used for strobe lights and fog machines. Depending on which DMX controller/system you are using, this jet may only function on channel 1 as the design is implemented to accept DMX signal, therefore unavailable on other channels. (Looking for full DMX control on multiple channels?... please see http://www.cryofx.com/products-page/all-products/cryofx-cryo-jet-dmx-512). This CO2 Jet shoots a 25' - 35' foot high stream of CO2 which is about 4'-6' feet wide! These CO2 Jets are used in stage productions, nightclubs, bars, live performances, concerts, haunted houses, special events and much more. They are similar to a fog machine but do not linger like fog, leave a residue or weird smell, or set off fire alarms. They also significantly cool down an area very quickly. The CO2 dissipates immediately after coming out of the gun so the cloud vanishes in seconds after the user stops activation. Want something custom? We also take custom orders, simple as a custom color nozzle and complex as an entire custom system. Please contact us with you idea!
More Information
Weight (kgs) 3.1
Voltage 110 VAC 50/60HZ (220 VAC Available)
Hose Length 15 Feet (4.57 meters)
Model Mounted Jet
Length 11 inches (27.9cm)
Height 7 Inches (17.7cm)
Width 5 inches (12.7cm)
Size and Type No
Linkable Yes, via DMX
Power 250 Watts
Range of Motion No
Tank Height 37.8" inches (96cm)
Tank Width 8 inches (20.32 cm)
Tank Weight 36 lbs (16.32 Kg)
Tank Material Aluminum
Tank Color Aluminum or Black
Tank Style Siphon Tube
Tank Capacity 35 lbs (15.87Kg) (15.9L)
Tank Valve Outlet Orientation USA CGA-320 Compatible Only
Temperature Rating No
LED Count No
LED Color No
LED Wattage No
Reach 25'-35' feet (7.6-10.6 meters)
Nozzle Material No
Pressure Rating Up to 1100 psi (75.84 bar)
Warranty 1 Year - Operational Defect(Jet)
Warranty (Tank) 15 Day Operational
Display Product Options In Block after Info Column

No

Write Your Own Review
You're reviewing:Cryo Jet DMX Switchable T35

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.