CryoFX CO2 LED Jet Inline is the perfect fit for stage productions when a non-mounted cryo jet is needed to simply sit on the stage and point directly upward. With the same capabilities as the LED Jet Switchable, this LED Jet includes pre-selected modes and full DMX control via individual DMX channels. Offering the most LEDs of any CryoFX Co2 Jet, this unit houses 24 individual 3-in-1 LED lights, two rows of 6 on each side of the nozzle. This DMX controlled CO2 Jet can light up CO2 clouds almost any color, to include; Red, Green, Blue, Yellow, Purple, Cyan, Orange, and White! Instantly light up your clouds of CO2 with vibrant colors to create effects imitating that of 'Fire' (orange or red light) or 'Clouds' (blue or purple light) or simply match the color scheme of your event or venue. CryoFX CO2 LED Jet Inline is designed to have an extremely high light and CO2 output while maintaining low noise output. With the ability to run pre-programmed patterns or take full control of colors, sound activation, strobe, and fades, and more via individual dmx channels, the possibilities are almost endless! Controlled by a standard DMX 512 controller, this LED Cryo Jet uses only 7 channels of DMX; 1 channel for on/off of CO2, 1 channel for on/off/dimming of lights, 1 channel for each of the base colors (red, green, blue), 1 channel for strobe/speed function, and 1 channel for color mixing. Reaching a height of 25-35 feet (8-10 meters) and only weighing 13 Lbs (5.89Kg), CryoFX CO2 LED Jet Inline will give you awesome colors and effects while remaining easy to move across your stage. This LED Jet is linkable to other units through XLR DMX Connectors. It may be used with high or low pressure CO2 Systems and is available in both 110vAC and 220vAC. LED CO2 Jet Inline also comes with 1 year manufacture warranty from date of purchase. Package comes complete with user manual and 15 feet (5 meters) of hose so you are ready to use in minutes. CO2 is not included.
Plug and play LED Jet Inline, with hose and fittings is ready to connect to a CO2 tank. This package comes with the following:
• LED CO2 Jet Inline with attached quick connect fitting and base plate for mounting
• 15' Foot (5 meters) long Hose with attached quick connect fitting
• CO2 Brass fitting (to connect hose to CO2 Tank) (Tank NOT included)(Fitting specific to purchasers region/country)
• Power Cable
• 3 Pin DMX Cable (15 foot long)
• Manual, Safety Guidelines, and FAQ (Frequently Asked Questions)
The hose and LED Jet Inline listed here have quick connect fittings already installed so you can easily disconnect the hose from the LED CO2 Jet Inline when not in use. Electricity is required for this package, which connects to any standard wall outlet (specific to users region/country). Simply connect the hose to the LED cryo jet and the other end of the hose to your CO2 tank. Then connect your DMX cable to the LED CO2 Jet "In" jack and the other end to any DMX 512 controller, and your ready to go! This CO2 Jet shoots a 25-35 foot (8-10 meters) high stream which is about 4'-6' wide! These CO2 Jets are used in stage productions, nightclubs, bars, live performances, concerts, haunted houses, special events and much more. They are similar to a fog machine but do not linger like fog or set off smoke alarms. The CO2 dissipates immediately after coming out of the jet so the cloud vanishes seconds after the user stops spraying.