Co2 Fitting Tool
CryoFX Co2 Fitting Tool is must have. Never be stuck without a wrench again! This Co2 Tool stays on the hose when attached to the Co2 Tank so it wont get lost!
CryoFX Co2 Fitting Tool is essential in ensuring the Co2 Fitting on your CryoFX hose is securely tightened to the Co2 Tank and no Co2 is wasted by slowly leaking out. This tool is made of ABS Plastic so it's lightweight and easy to store away.
Please place this tool onto the Co2 Fitting BEFORE attaching the Co2 Fitting to the tank.
Please do not overtighten the Co2 Fitting onto the tank as it may damage the tool and/or the tank. Some tanks may have bent threads so the Co2 Fitting will be a little difficult to tighten onto the tank. The easy way to tell if the Co2 Fitting is all the way on is by wiggling the stem of the Co2 Fitting (the part that connects to the hose) up and down, if the hose & stem does not wiggle, the fitting is on all the way, so it is at this point you take this tool and tighten a quarter to a 3rd of a full turn. If the stem/hose still wiggles up/down, then the Co2 Fitting nut should be tightened onto the tank more than it currently is, even if it is a little difficult. This would indicate the threads of the tank are bent a little.
Questions, please contact us:
Email- [email protected]
|Model||CryoFX Brand - Color : Black/Grey|
|Length||6.5 inches (16.51cm)|
|Height||3/4 inches (1.90cm)|
|Width||2 inches (5.08cm)|
|Size and Type||No|
|Range of Motion||No|
|Tank Valve Outlet Orientation||No|
|Nozzle Material||ABS Plastic|
|Display Product Options In||Block after Info Column|