High Pressure Co2 Tank Hose | CryoFX®
Co2 Tank Hose | Co2 High Pressure Hose - Custom Built Same Day
Rental / Purchase. CALL NOW to Order!
Co2 Tank Hoses • Used New High Pressure Co2 Hoses
Contact us NOW for info...Call:1.855.527.9639
CryoFX® LLC • 3859 S Valley View Blvd, Suite 2, Las Vegas, NV 89103 • 1.855.527.9639
Co2 Gas Delivery Info: https://www.CryoFX.com/gas
CO2 Tank Hose by CryoFX®.
A CO2 tank is used to store carbon dioxide in gaseous or liquid form. These cylinders are regulated and contain a high pressure gauge that is used to measure the amount of CO2 that is left in the CO2 cylinder.
The most recommended and highly rated supplier of CO2 tanks and other special effects equipment is CryoFX. While prices vary by location as well as based on other factors, CryoFX assures its clients of the best market prices. This is because CryoFX books nationally and handles many accounts.
CryoFX branded CO2 tank hoses are compatible with all CryoFX CO2 jets. These hoses can be purchased as per your preferred length.
The CryoFX high pressure CO2 tank hose is the standard for Co2 Cryo hoses. This feature is attributed to the hoses’ light weight and durability nature.
CryoFX offers CO2 tank hose for special effects as well as other applications such as medical marijuana and brewing applications.
The CryoFX CO2 cylinders have massive output and highly rated performance. It is easy to order from CryoFX either through an online order form, by physically visiting one of the showroom in San Diego, or by calling on (619) 855- 2796.
The CO2 hose used with the hose vary by; size, weight, purpose and output limit time as well as make up composition (made of steel or aluminum). The cylinders can be short, normal height, fitted or not fitted with a siphon tube.
CryoFX offers the best CO2 cylinders in terms of variety as well as pricing compared to its competitors. It refills all types and sizes of the CO2 cylinder offering delivery and pick up as after sales services. Their services are customer focused to ensure client satisfaction at its best.
Uses for a Co2 Tank Hose - High Pressure? Yes! Low Pressure, Still Ok!
Below are the varieties of CO2 cylinders offered by CryoFX that a High Pressure Co2 Hose can work with, which is not the only set they work with as they are built to order and can work with any co2 setup.
The 35lb non-siphon CO2 cylinder is made of Aluminum. It is best suited for small productions.
This CO2 cylinder is easy to transport due to its light weight nature. It is perfect for all mobile CO2 special smoke effects. It offers about 25 bursts of 4 to 5 seconds each. It is sold around $279 while the 35lb CO2 tank with a siphon tube is priced around $289.
The 20lb Aluminum CO2 cylinder fitted with a siphon tube (also known as a dip tube or educator tube) is a necessity for all CO2 jets. You will not have to turn this cylinder upside down for liquid use, such as with the CryoFX CO2 jets. This cylinder being the smallest offered by CryoFX has a limit supply time of about 40 seconds of liquid CO2 supply. This CryoFX CO2 cylinder can be used for any application that requires CO2 which used CGA320 style CO2 valve.
The presence of the valve dictates that when the cylinder is used in its upright position, it will disperse CO2 in its liquid form. The 20lb CO2 cylinder is made up of aluminum and is hydro tested before being sold. It can be filled by any CO2 gas facility that fills CO2 cylinders. When used in conjunction with CryoFX CO2 canon or LED CO2 jet, it disperse liquid as needed for the CO2 jets to work. This CO2 cylinder retails at $179.
High Pressure Co2 Hoses in conjunction with Co2 tank Sizes
•The high pressure co2 hose with the 75lb CO2 tank made of steel is best used with stage CO2 canons and night club canons CO2 systems. It is best suited for situations where constant movement is not required. This CO2 cylinder by CryoFX has a limit of about 2 minutes and 15 seconds of liquid CO2 supply. It can be used for any application that requires CO2 within an area that uses CGA320 style CO2 valve. This cylinder is long lasting. It is required to get filled by any CO2 gas facility that fills CO2 cylinders and can be reconditioned as new.
•The high pressure co2 hose with the 100lb CO2 cylinder made of steel is perfect for use with stage CO2 cannons and all CO2 systems. It is best in use with minimal movements with a limit of 2 minutes and forty five seconds of liquid CO2 supply. Both the 100lbCO2 cylinder with or without the siphon tube are made of steel. They both have the same limit output time.
•The high pressure co2 hose with the 50lb non-siphon Aluminum CO2 cylinder is best for use with CO2 canons and handheld Cryo guns. This cylinder has a limit of about 1 minute and 25 seconds of liquid CO2 supply. The 50lb CO2 cylinder can be used for any application that requires CO2 in any region that uses CGA320 style CO2 valve. The 50lb CO2 cylinder is the standard CO2 cylinder for nightclubs, productions and many more events. This is the most common cylinder chosen before moving to oversized options. When used together with CryoFX CO2 swing jet or Cryo gun, it disperses liquid CO2 as required for the CO2 jets to work. It is hydro tested before being sold.
The 50lb siphoned aluminum CO2 cylinder by CryoFX has a dimension of 11 by 50 inches and a usage limit time of 1 minute and twenty five seconds of liquid CO2 supply
The high pressure co2 hose with the 135lb CO2 cylinder is the largest offered by CryoFX. It has enough capacity to last you through the whole of your event. It is perfect for cooling the dance floor at high energy nightclubs. This large CO2 cylinder provides massive output, delivering more plumes of CO2 smoke than the smaller sized ones. This CO2 cylinder is offered in two varieties; one fitted with a siphon tube while the other is without the siphon tube
CryoFX offers long lasting, reliable and efficient CO2 cylinders providing events that change the overall mood of a crowded event. The CO2 equipment and Co2 tank hoses by CryoFX operate at very high standards and increases the energy at events.
CryoFX high pressure co2 tank hose has the capacity to hold very high pressure of over 2250psi. It is black in appearance and has many layers. This hose has a special treatment which ensures that the hose does not explode and outer layer, the jacket, does not bubble up.
Does a Co2 High Pressure Hose Smell?
The CO2 tank hose by CryoFX does not have any bad smell which is observed in other hose brands if used with CO2. Other hoses will release an aweful smell as the rubber or inside when affected by cold temperatures will release a smell that the audience will smell if you use the wrong high pressure co2 hose. Using the wrong hose period, for innstance a garden hose or similar, would be an extremely dangerous action. These hoses are not meant for use with high pressures and cold temperatures, and therefore would burst open, explode, and if not secured, would swing around openly creating an extreme hazard.
CryoFX has proven to be the most preferred CO2 Special Effect supplier. CO2 Special Effects equipment and CO2 supplies are easy to order from CryoFX. All the local purchases in the USA can be completed at any of the showroom in San Diego.
Custom Built Co2 Tank Hoses? Yes, Same Day!
CryoFX manufactures its own High Pressure CO2 hose which is built in house and can be customized. With the proper equipment, CryoFX® can custom build hoses generally same day, of course this depends on demand, workload in warehouse, and order requirements. That said, the equipment, fittings, and necessary items are readily available for CryoFX® technicians to build hoses on the spot to ship same day to meet customer last minute demands. Oh yes, last minute is the key here!
CryoFX® generally stocks select pre cut and built sizes for normal selected Co2 tank hoses with products or co2 tanks, but the capacity to build any length right away is completely within scope of the CryoFX® warehouse team.
For enquiries about orders may be made via CryoFX’s online order form or by phone. Call any of their representatives on (619) 855- 2796 or visit www.cryofx.com for more information.
You can make CO2 cylinder and Co2 hose orders either online which is the preferred method to streamline the process. Contact CryoFX on (619) 855-2796. Also, you can contact [email protected] or dial (+855-527-9639) for your orders and enquiries.
Carbon dioxide (CO2) is an important gas used in a variety of industries such as food and beverage, welding, and medical equipment. CO2 is commonly stored in pressurized tanks and transported through hoses to be used in various applications. The CO2 tank hose is an essential component of the system and it is important to understand its various aspects including the connection, size, replacement, adapter, clamp, valve, regulator, assembly, extension, and repair.
CO2 Tank Hose Connection The connection of the CO2 tank hose is an important aspect to consider for the safe and efficient use of the gas. There are different types of CO2 tank hose connections such as CGA-320, CGA-580, and DIN-477. The CGA-320 connection is commonly used for CO2 tanks that are used in beverage and aquarium applications. The CGA-580 connection is used for CO2 tanks that are used in welding and industrial applications. The DIN-477 connection is commonly used in Europe.
CO2 Tank Hose Size The size of the CO2 tank hose is another important aspect to consider. The most common sizes of CO2 tank hoses are 3/16", 1/4", and 5/16". The size of the hose is determined by the flow rate of CO2 that is required for the application. The larger the flow rate, the larger the size of the hose that is required.
CO2 Tank Hose Replacement The CO2 tank hose may need to be replaced from time to time due to wear and tear. It is important to replace the hose when it becomes damaged or starts to leak. The replacement of the hose should be done by a qualified professional to ensure that it is done safely and correctly. When replacing the hose, it is important to ensure that the new hose has the correct connection and size for the application.
CO2 Tank Hose Adapter The CO2 tank hose adapter is used to connect hoses with different connections. For example, if the CO2 tank has a CGA-320 connection and the regulator has a CGA-580 connection, an adapter can be used to connect the two. It is important to ensure that the adapter has the correct connection for the application to ensure safe and efficient use of the gas.
CO2 Tank Hose Clamp The CO2 tank hose clamp is used to secure the hose to the tank or regulator. The clamp ensures that the hose does not come loose and cause a leak. It is important to use a clamp that is the correct size for the hose to ensure that it is secure.
CO2 Tank Hose Valve The CO2 tank hose valve is used to control the flow of CO2 from the tank. The valve should be opened slowly to prevent a surge of gas from the tank. The valve should also be closed slowly to prevent the hose from whipping around and causing damage.
CO2 Tank Hose Regulator The CO2 tank hose regulator is used to control the pressure of the CO2 that is delivered from the tank. The regulator should be set to the correct pressure for the application to ensure safe and efficient use of the gas.
CO2 Tank Hose Assembly The CO2 tank hose assembly consists of the hose, connection, adapter, clamp, valve, and regulator. The assembly should be put together by a qualified professional to ensure that it is done safely and correctly.
CO2 Tank Hose Extension The CO2 tank hose extension is used to extend the length of the hose to reach a remote location. The extension should be the correct size and have the correct connection for the application to ensure safe and efficient use of the gas.
CO2 Tank Hose Repair The CO2 tank hose may need to be repaired if it becomes damaged. It is important to repair the hose as soon as possible to prevent leaks